Advertisement
OVEN CONTROLS FUNCTIONS
Setting a Self Clean Cycle or a Delayed Start Self
Clean Cycle.
IMPORTANT
To start a self clean cycle immediately without a delay,
skip steps 2 and 3 in the instructions below.
To set a self clean cycle:
1. Be sure the clock displays the correct time of day.
2. Press start time. The colon (
flash.
3. Press and hold
to scroll to the time to start the
delayed self clean cycle. Release the pad when the
desired time is displayed.
4. Press clean. The display will show – – – in the window.
5. Press
or
once. 3:00 will appear in the display
indicating that a 3 hour self clean time is set. To change
to a 2 hour self clean time press
in the display).
6. CLn will appear in the display during the self clean
cycle and the door locked light will glow until the self
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
NOTE
After setting the controls, the motor driven lock will begin
to close automatically and the door locked indicator light
will flash. Do not open the oven door while the light is
flashing. Allow about 15 seconds for the oven door to
lock.
When the self clean cycle has completed:
1. The time of day will appear in the display window and
the clean and door locked lights will continue to glow.
2. Once the oven has cooled down for about 1 hour and
the door locked light has gone out, the oven door can
be opened.
16
:
) in the time of day will
once (2:00 appears
Stopping or Interrupting a Self Clean Cycle
To stop or interrupt a self cleaning cycle once it has
been activated:
1. Press clear off.
2. Once the oven has cooled down for about 1 hour and
the door locked light has turned off, the oven door can
be opened.
3. Restart the self clean cycle once all conditions have
been corrected.
CAUTION
•
To avoid possible burns use care when opening the
oven door after the self cleaning cycle. Stand to the
side of the oven when opening the door to allow hot
air or steam to escape.
•
Do not force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the door after the
self cleaning cycle has completed. The oven may still
be very hot.
NOTE
•
Whenever the self clean feature is active you may
check the amount of time remaining in the self clean
cycle by pressing the clean key. Remember the range
door cannot be opened until the range has cooled
sufficiently. You will need to add about 1 hour to the
time displayed before you can use the range for
cooking.
•
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Advertisement
