Set Digital Outputs; Erase Snapshots Stored In Flash Memory; Erase Logo And Graphic Buttons; Skip Installation During The Next Boot - Vivotek IP3111/IP3121 User Manual

Set digital outputs

To set digital output to connect NO with COMMON, type "DO=L".
To set digital output to connect NC with COMMON, type "DO=H".

Erase snapshots stored in Flash memory

Typing "erase image" will clear all snapshots saved in Flash.memory.

Erase logo and graphic buttons

Typing "erase graph" will clear all images used on the homepage. If no new images are uploaded, the
system will switch to text mode and use default images instead.

Skip installation during the next boot

Typing "lock" will inform NetworKam to fix current network settings. It need not wait for installation
during the next boot.

Reset network for new settings

Typing "unlock" will make NetworKam give up current settings and wait for installation.

Restore factory default settings

Typing "clear" will make NetworKam restore factory settings but not restart. To validate new settings,
type "reset" to make the system restart.

Reset system

Typing "reset" will make NetworKam perform a software reset.
73
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097