HANNspree Hanns G HL225PPB User Manual page 15

Language
OSD H .Pos.
OSD V. Pos.
OSD Timer
Transparency
SYSTEM
Mode
Audio Volume
Signal Source
Aspect Ratio
Active Contrast
RESET
Reset
Select 「LANGUAGE」 option to change the language
of the OSD. Enter the option and select a language.
[Reference only, the OSD Language depends on the
selected model]
Select 「OSD H. Pos.」option to adjust the horizontal
position of the OSD. Enter the option and adjust the
level.
Select 「OSD V. Pos.」option to adjust the vertical
position of the OSD. Enter the option and adjust the
level.
Select 「OSD TIMER」option to set the OSD time out
from 3 to 60 seconds. Enter the option and adjust the
level.
Select 「TRANSPARENCY」option to adjust the
transparency of the OSD. Enter the option and adjust the
level.
Select the mode according to your preference: PC/
GAME/ MOVIE
[The availability of this function depends upon the
selected model]
Select the 「VOLUME」option to change the volume
level. Enter the option and adjust the level.
function applies only to models with incorporated
audio.]
● By high volume, risk of hearing damage exists.
Select the 「Signal Source」option to change between
analog (VGA) or Display (DP) source. Enter the option
and select Analog or Display.
key to change to 「16:9」 「AUTO」 「4:3」
Select the 「Active Contrast」option to switch the
function On or Off. [Dual input mode optional]
Select the 「RESET」option to reset to the monitor's
default setting. This will erase the current settings.
15
User's Manual
[This