Sangean WFT-1D+ Manual page 34

Finding new stations - Digital Radio (DAB plus)
If you would like to use your radio for Digital Radio (DAB plus) reception
in a new location, or if no station were detected during the initial scan,
you can follow the procedure below to find out which stations
are available:
1. Ensure the radio is on and in DAB plus (Digital Radio) mode.
2. Press the BACK button (if necessary) to go to the DAB plus
(Digital Radio) menu.
3. Rotate the Turning knob until "Local scan" is highlighted on
the display, and press the Turning knob. And your radio will
perform a scan of your local frequencies.
4. The display will show "Scanning". As new stations are found,
the counter will increase and stations will be added to the list.
5. To scan a full range frequency of your radio, rotate the Turning knob
until "Full scan" is highlighted, and press the Turning knob.
The display will show "Scanning". As new stations are found,
the counter will increase and stations will be added to the list.
33