Table of Contents
Advertisement
6 Use the lamp removal handle to lift the lamp module straight out of the lamp bay.
7 Replace the lamp in the lamp module, then insert the lamp module back into the
lamp bay.
Caution
Make sure that you do not touch the lamp. The oils from your hands
can cause the lamp to fail prematurely.
8 Replace the two lamp module retaining screws.
Important
Make sure that the screws are fastened securely to make sure that
the lamp will not shake.
Safety discard the used lamp.
9 Replace the lamp bay access panel, then replace the two access panel screws.
10 Connect the power cable and all external cables.
Advertisement
Table of Contents
Troubleshooting
