Table of Contents
Advertisement
10
www.aeg.com
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
the display is blank.
2. Press Start.
• The indicators
off.
• The indicator
continues to flash.
• The display shows the current
setting.
–
–
3. Press Start to change the setting.
4. Press the on/off button to confirm
the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
and
start to flash and
and
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
,
AirDry is automatically activated with all
programmes excluding
(if applicable).
go
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
the display is blank.
2. Press Delay.
• The indicators
• The indicator
flash.
• The display shows the current
setting:
3. Press Delay to change the setting:
= AirDry deactivated.
4. Press the on/off button to confirm
the setting.
and
and
start to flash and
and
go off.
continues to
= AirDry activated.
,
Advertisement
Table of Contents
