Control Lock; Interior Display Lighting; Changing The Tri-Color Lighting - AGA marvel MP15CPG2 Series Installation, Operation And Maintenance Instructions

Turning your ice machine On and Off:
If your appliance is on, "ICE" will be displayed.
To turn the appliance off, push and hold the "ON/
OFF" icon for 3-seconds. The display will show
"OFF" .
NOTE
When turned off, the ice machine will complete its
current ice production cycle then shut off.
The drain pump (if equipped) and the interior light
will still be functioning during the OFF mode. To
turn the appliance back on, press and hold the "ON/OFF"
icon for 3-seconds, the display will show "ICE".
WARNING
!
Turning the ice machine "OFF" will only terminate the
ice production, it does not remove power from the ap-
pliance. Always unplug the power cord from the wall
outlet before servicing the unit.

Control Lock:

The user interface can be locked to avoid unintentional
changes from things like cleaning. To lock the appliance,
push and hold the "LOCK" icon for 5-seconds. The "LOCK"
icon will flash 3 times, then change to steady back-lit. To
unlock the user interface, press and hold the "LOCK" icon
for 5-seconds, and the back-light will turn off.
NOTE
The "LOCK" icon is the only active key in this mode.
If other icons are pressed while in the lock mode the
"LOCK" icon will flash 3 times, and an audible tone
will sound, to remind the user the appliance is in the lock
mode.
USING YOUR ELECTRONIC CONTROL
ICE
OFF
ICE
Interior display lighting : (Glass door models
only)
Your appliance is equipped with a dual light level display
lighting feature. Press the "Light" keypad once to activate
the interior lighting display feature at full illumination. A
confirmation tone will sound, and the light bulb "Icon" will
illuminate. Pressing the "Light" keypad a 2nd time will dim
the lighting to 50%. A 3rd press will deactivate the display
lighting feature. The display lighting will automatically deac-
tivate after 4-hours.
Changing the Tri-Color lighting: (all models)
Figure 22
The light switch for changing
the light color is located in the toe
grille. Move the switch (see Figure
22a) to the left or right to change
the color of the light between blue,
white, or amber.
14
Figure 22a
Three position
slide light switch