Sharp Aquos U SHV37 Basic Manual page 6

Proximity sensor/Light sensor, earpiece (receiver)/speaker, mouthpiece
(microphone)
◎ This product combines the earpiece and speaker. When you convert to a
hands-free talking or end a call, sound gradually increases to the set
volume to prevent a loud sound from the speaker at your ear.
◎ Placing stickers, etc. over the proximity sensor/light sensor may prevent
the product from operating properly.
◎ Covering earpiece (receiver)/speaker or mouthpiece (microphone) with
stickers, fingers, etc. may hinder product performance.
Internal antenna, Wi-Fi
◎ Antennas are built into the product. Do not cover with hand during calls or
data communication. Doing so may affect call/communication quality.
Earphone/Microphone jack
◎ An earphone/microphone with the switch or depending on the type of the
earphone/microphone, it may not be available with the product.
Using the au Nano IC Card 04
au Nano IC Card 04
The au Nano IC Card 04 records your personal information such as phone
numbers.
This product supports au Nano IC Card 04.
◎ Make sure to unplug the microUSB plug of the common AC adapter 05
(sold separately) etc. from the product when attaching or removing the au
Nano IC Card 04.
Attaching the au Nano IC Card 04
Before attaching the au Nano IC Card 04, turn the product off.
A
Open the au Nano IC Card 04/microSD memory card cover.
Hook the tip of a finger into the slot and pull out it forward (A), and then
rotate it in the direction of the arrow to open (B).
Slot
B
Slowly pull the au Nano IC Card 04 tray straight out by
hooking a finger on it.
® ®
/Bluetooth antennas, GPS antenna
au Nano IC Card 04
IC (metal) part
Front
au Nano IC Card 04 tray
Back
5