Table of Contents
Advertisement
P
UTTING THE
Putting the Units into Operation
Important: please make sure you've read the safety information on
page 16 before you set up your system.
The data transmitted (image and/or sound) are digitally coded.
Checking the package contents
The package contains:
•
One camera unit (transmitter)
•
One monitor unit (receiver) with belt clip/support
•
One rechargeable battery for the receiver
•
One power adapter plug for the transmitter
•
One charger with power adapter plug for the receiver
•
One operating manual
Connecting and aligning the transmitter
Attention: Position the transmitter with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Point the upper section of the transmitter towards the baby or object
you want to monitor. Check that the baby or object is suitably displayed
on the receiver.
Operating with batteries (not contained in the material supplied)
Use a small screwdriver to open the transmit-
ter's battery compartment on the underside.
Insert the batteries, paying attention to correct
polarity. Refer to the diagrams in the battery
compartment. Close the battery compartment
again.
4
U
O
NITS INTO
Helpline UK 0844 800 6503
(See page 18 for costs and hours of operation)
PERATION
Advertisement
Table of Contents
