Yamaha Clavinova CLP-625R Owner's Manual page 31

2-3
Insert the other two tapping screws (4 x 20
mm) into the other two screw holes to
secure B.
2-4
Securely tighten the screws on the top of B
that were attached in Step 2-1.
3.
Secure C.
Securely tighten the screws on C that were
attached in Step 1-3.
3
4.
Mount A.
Be sure to place your hands at least 15 cm away
from either end of the main unit when positioning
it.
Align the screw holes.
CAUTION
• Be extra careful not to drop the main unit or let your fingers
be pinched by it.
• Do not hold the main unit in any position other than the
position specified above.
At least 15 cm
5.
Secure A.
5-1
5-1
Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally when seen from the front.
5-2
Secure A by tightening the short screws (6 x
16 mm) from the front.
6.
Connect the pedal cord and the AC
adaptor.
Keyboard Stand Assembly
5-2
31
CLP-625 Owner's Manual