Table of Contents
Advertisement
Troubleshooting
Installation CD-ROM does not start WNU.
If the CD-ROM does not start the WNU automatically, it could
be that the computer is running other applications that are
interfering with the CD drive.
If the WNU screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the "My
Computer" icon. Next, double-click on the CD-ROM drive that the
Installation CD has been placed in to start the installation. Then,
double-click on the folder named "Files". Next, double-click on
the icon named "Setup.exe".
Power LED does not come ON; Card is not working.
If the LED indicators are not ON, the problem may be that the
Card is not connected or installed properly.
Verify that the Card is plugged firmly into the PCI slot of your
computer. Check to see that the drivers for the Card have
been installed. Right-click on the "My Computer" icon on your
desktop. Choose "Properties" and navigate to the "Device
Manager" and see if your Card is listed without any errors. If an
error is indicated, contact Belkin Technical Support.
27
27
1
2
3
4
5
6
Advertisement
Table of Contents
