Powering On/Off The Projector; Powering On The Projector - ViewSonic PJ755D User Manual

Portable dlp projector

Hide thumbs Also See for PJ755D:

Table of Contents

Powering On/Off the Projector

1 . Remove the lens cap.

2 . Ensure that the power cord and signal cable are securely connected. The Power LED will turn red.

3 . Turn on the lamp by pressing "Power/Standby" button on the control panel.

The start up screen will display for 30 seconds and the Power LED will flash green.

When the startup screen disappears, the Power LED will turn green.

4 . Turn on your source (computer, notebook, video player, etc.). The projector will detect your source

automatically.

* If you connect multiple sources at the same time, use the

Source

button on the control panel to switch.

* Turn on the pro-

ViewSonic PJ755D

jector first and

then the signal

sources.

Table of Contents