Table of Contents
Advertisement
■ Receiving
The
icon will flash and a calling ID or text message will
appear when a Status call is received. Press any key to
return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
•
The last received message is displayed.
2 Press
•
Message types are identified as follows:
I: Caller ID, S: Status Message, M: Short Message
•
Press and hold
information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press
•
To delete the selected message, press
the deletion, press
•
To delete all messages, press and hold
1 second. To confirm the deletion, press
S
/l
hort
ong
R eceived short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
gpS r
eport
To send your location data, you must first connect a GPS unit
to the transceiver. GPS data can be manually transmitted by
pressing the key programmed as Send the GPS data, or by
accessing the Menu {page 2}. If set up by your dealer, GPS
data may be automatically transmitted at a preset time interval.
/
to select the desired message.
to return to normal operation.
m
eSSAgeS
for second to cycle the display
or
.
or #. To confirm
or # for
or
.
9
Advertisement
Table of Contents
