Mouse Charge Mode - ViewSonic ViewMate CW2403 User Manual

1. Remove any existing mouse drivers completely.
2. Insert the driver CD-ROM to your computer.
3. Please open the folder "Mouse" and double click the file "Setup.exe" to complete the driver
installation.
4. Restart the computer.
5. A Mouse Setting icon will appear on the task bar of Windows after you successfully finish the
installation.
6. Double click the Mouse Setting icon and then follow the instructions of the selection items to
set the mouse properties.
7. The functions of the 4
Setting application. Please do not select the function "System Default" for the 4
buttons.
8. Introduction of the Office Application Software: You can simply apply the Office application
functions through the one-touch hot key on the top of the Office mouse.

Mouse Charge Mode

Note:
- Please skip this section if your mouse is not rechargeable.
- Please use rechargeable batteries for the chargeable mouse.
- At the first time of usage, please charge the AAA batteries at least 6 to 8 hours and 10
to 12 hours for the AA batteries.
• Charge by Receiver: The receiver must be connected with the required AC to DC adapter in
advance and then place the mouse on the receiver precisely.
• Please charge the batteries by placing the rechargeable batteries into the cradle and then closing
the cradle's cover. AA or AAA rechargeable batteries are compatible with the chargeable cradle.
• You may directly charge the batteries with the mouse by opening the cradle's cover and then
placing the mouse on the cradle.
• The LED indicator on the receiver will light while the mouse is low battery. Please recharge or
change the batteries immediately.
• Press any button to wake up the mouse while the mouse is in the sleeping mode.
ViewSonic
and 5 mouse buttons must be enable and set through the Mouse
th th
ViewMate TM Wireless Desktop CW2403
and 5
th th
7