Getting To Know Your Router - Belkin N User Manual

11481227250_8820-00774_F9K1002_N300_Wirless_N_Router_v3_02_15_11_加上警
語-ok

Getting to Know Your Router

Front Panel
[DIAGRAM front.ai]
A) Router Status Light
Your Router's status is shown by the light on the front.
Off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Blinking Amber: The Router can't detect the modem. Either the modem is
off, is not plugged into the Router, or is unresponsive.
B) Wi‐Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to help
establish a secure connection between your Router and other WPS‐
enabled Wi‐Fi devices such as computers. To use the WPS feature
on your Router, see "Getting Started > Adding Computers to Your
Network > Using the WPS Button".
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS‐enabled computer or
other device.
Solid Blue: The Router has made a secure connection with the computer or
other device.
Amber: A connection was not created.