Advertisement
11481227250_8820-00774_F9K1002_N300_Wirless_N_Router_v3_02_15_11_加上警
語-ok
Does the Router support Wireless Protected Access (WPA) security?
The Router ships with WPA/WPA2 security turned on. Windows XP
and some older network hardware may require a software update
to support WPA/WPA2.
I am having difficulty setting up WPA security on my Router.
Log in to your Router by visiting http://router/ with your
1)
web browser. Click on the "Login" button in the top right-
hand corner of the screen. You will be asked to enter your
password. If you have never set a password, leave the
"Password" field blank and click "Submit".
Click "Wireless" in the left‐hand menu. Then click "Security"
2)
just below that.
Select the "WPA/WPA2" option.
3)
Enter a password. This can be from 8–63 characters of your
4)
choice, including spaces and punctuation, OR a 64‐digit
hexadecimal number (using only the numbers 0–9 and letters
A–F).
Click "Apply Changes" to finish. Your wireless connection is
5)
now encrypted. Each computer using your wireless network
will need to use the new key.
Note: If you are configuring the Router over a wireless
connection, you will have to re‐connect to the Router after
changing any security settings.
Note: Some older networking hardware supports only WEP
encryption. If your older computers cannot connect to your
network, try 128‐bit or 64‐bit WEP, or seek software updates
from their manufacturers.
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my
Router.
Advertisement
