Advertisement
11481227250_8820-00774_F9K1002_N300_Wirless_N_Router_v3_02_15_11_加上警
語-ok
Restoring the Router to Default Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface. This may be because the
Router is not performing as expected or you wish to remove all previously configured
settings.
Setup steps:
Open a web browser on the computer.
1.
In the address bar of the web browser, type "http://192.168.2.1".
2.
Click "Login" in the upper right-hand corner of the page. The Router does not ship with a
3.
password, so just click "Submit".
Click on "Restore Factory Defaults" in the left-hand column under the "Utilities" heading.
4.
Click on the "Restore Defaults" button.
5.
A warning box will open that says, "Warning: All your settings will be lost. Are you sure
6.
you want to do this?" Click "OK".
Advertisement
