Personal Computer; Pc Timing Reference Chart - ViewSonic VTMS2431 User Manual

Getting Started

Personal Computer

Use the LCD TV as the monitor of your computer.
The picture below shows the connection for PC. The LCD TV can also be connected to PC
with DVI or HDMI output.
☼
• Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
• If the PC is connected to TV and no signal has been input from PC for more than 5 seconds,
the TV will enter standby mode automatically.

PC Timing Reference Chart

Mode
Standard
720 x 400 @ 70Hz
VESA 640 x 480 @ 60Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 75Hz
Apple, Mac II 1152 x 870 @ 75Hz
VESA 1280 x 768 @ 60Hz
VESA 1280 x 1024 @ 60Hz
VESA 1440 x 900 @ 60Hz
VESA 1680 x 1050 @ 60Hz
VESA 1920 x 1080 @ 60Hz
☼
• This TV's PC VGA input does not support interlaced signals.
• For the best picture quality, we recommend that you use the signals (boldfaced) in the above
chart with a 60 Hz vertical frequency from a personal computer.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Rear of TV
Connect to an HDMI
compatible PC with
the HDMI cable.
VGA 15 Pin cable
Aspect Ratio Handling
Resolution
19
FS*Full-Screen
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
Audio cable
(stereo mini plugs)
Compatible Input
RGB
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
VTMS2431