Fixing Viewsonic Lcd Tv To The Wall - ViewSonic VS10945-1G User Manual

Fixing ViewSonic LCD TV to the Wall

The LCD TV can be wall-mounted or freestanding. Before installing the product to the wall,
please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use
only.
• Do not install near heat source, or strong magnetic fields.
• Use only approved wall brackets capable of supporting the weight of the LCD TV.
• Mount your LCD TV to a supporting wall.
• Ensure there is at least 3cm of space surrounding any air-vents of LCD TV.
To detach the wall-mounting bracket to LCD TV safely, please use the following guidelines:
1. Disconnect the power and any other cables that might hinder moving the LCD TV.
2. Set the LCD TV on a table or work surface, screen-down with a towel or woolen blanket
between the screen and the surface to protect the display.
3. There are 6 screws holes in the bracket that match the LCD TV (as shown), two-pairs are
at opposing ends of the base (perpendicular to the TV rear panel), and a single screw is
mounted on the underside of each supporting upright (parallel to the direction of the
supports). Loosen all six screws, and keep for future use.
Use only approved wall-mounting brackets advised by ViewSonic or your local distributor.
Notes:
•
If your LCD TV is already set up for free-standing operation, you need to first remove the stand before
mounting the device to the wall.
•
The wall-mount screw type: M6 x L10
ViewSonic 5 N4200w