Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes.
CFL Reflector edge softly. Otherwise the TFT Module may be damaged. (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface Connector of the TFT Module. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 5
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950 or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 6
Do not touch and that may cause ”Mura”. the surface of the polarizer. Take out the monitor with cushions Taking out the monitor by grasping the LCD panel. That may cause ”Mura” Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 7
Place the monitor on a clean and soft foam Placing the monitor on foreign objects. That pad. could scratch the surface of the panel or cause “Mura”. The panel is placed facedown on the lap. That may cause “Mura”. Confidential - Do Not Copy ViewSonic Corporation VA905...
Also a shortcut to Auto Image screen. Adjust. Power light Displays the Green = ON Main Menu or exits the Orange = Power Saving control screen and saves adjustments. Standby Power On/Off Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 12
Select the menu items shown below by using the up [▲] and down [▼] buttons. Main Menu: Auto Adjust: To automatically adjust H./V. Position, Phase adjust and Clock adjust. REMARK: There may need manual adjustment of “ phase " for optimized performance for various VGA tolerance. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 13
Contrast /Brightness: To adjust the Contrast of the video and the backlight currency. Color Adjust: To select the color temperature 6500°K, 9300°K , 5400°K or user settings. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 14
Information: To display the data about Horizontal / Vertical frequency, Pixel clock, Resolution , Model number and Serial No. of the monitor. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 15
H./V. Position: To adjust the horizontal and vertical position of the video. Hsize: To adjust the horizontal pixel clock of the video. Fine Tune: To adjust the delay time of data and clock. Sharpness: To select the picture sharpness of display. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 16
Restore default settings of Clock, H./V. Position, Phase, Contrast, Brightness, Color temperature, OSD position, OSD timeout and Sharpness, Volume. Audio Menu: Volume: To adjust the output of speaker or earphone. Mute: To set or reset the mute function. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 17
[Up] + [Down] + [Power On] with signal Inter FACTORY mode adj white balance. (hold for 3 seconds) [Up] + [Down] + [Power On] Burn in Mode. without signal (hold for 3 seconds) Confidential - Do Not Copy ViewSonic Corporation VA905...
Such pin as input function. A “open drain pin” means it can sink at least 4mA current but only drive 10~20uA to VDD. It can be used as input or output function and needs an external pull up resistor Confidential - Do Not Copy ViewSonic Corporation VA905...
1024 x 768 @ 70Hz, 56.5kHz 15. 1024 x 768 @ 70Hz, 56.5kHz 1024 x 768 @ 72Hz, 58.1kHz 16. 1024 x 768 @ 72Hz, 58.1kHz 1024 x 768 @ 75Hz, 60.0kHz Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 20
White Balance White & Black The screen must have the Figure 9 Pattern pure white and black pattern, no other color. Fine Line Morie Pattern (Figure1) Gray Scale Pattern (Figure2) Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 21
Horizontal & Vertical Thickness Pattern (Figure 3) R. Color Pattern (Figure 4) G. Color Pattern (Figure5) B. Color Pattern (Figure 6) Full White Patter (Figure 7) Dark Screen Pattern (Figure 8) Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 22
(a) Select and enter “Manual Image Adjust” function on OSD Main Menu. (b) Then, select and enter “Horizontal Size” or “Horizontal/Vertical Position” function to adjust the video boundary to be full scanned and within screen frame. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 23
After final QC step, we have to erase all saved changes again and restore the factory defaults. You should do “All Mode Reset” again. 1.5.15 Power Off Monitor Turn off the monitor by pressing “Power” button. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 24
2.2.1 Connect P2 of Fixture with printer port of PC by LPT Cable. 2.2.2 Connect P1 of Fixture with Monitor by VGA Cable. 2.2.3 Connect Power Cord to Monitor. 2.2.4 Connect PC to the additional monitor. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 25
3. ISP Download program procedure 3.1 Hardware Connect status: 3.2 Down load isp program Step 1: Execute ISP.exe Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 26
Then press the Creat Security File Button to enter step 3. Step 3: Creat Security File Enter the three string into the blank like fig 2. Then press OK Button. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 27
Press the Load MCU File button to select the file will be download. (*.hex) Step 5: Run Pressing the Run Button to start download program. Press OK button to Enter ISP mode. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 28
If the test result shows “passed,” it means the connection is well. If not (failed), it means the connection has problems. Then you need to check the setup procedure or reboot the PC, or simply use another PC to do the firmware upgrade. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 30
4.(when key in DVI DDC information, use VGA transform to DVI port ) 5.Connect Power Cord to VA905 Monitor. 4.3 DDC Key In Procedure 1.Run DDC.exe 2.Choose model number and conform the Time then Press “ENTER” key. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 31
3.When appear the PIC “ choose DDC Card”, Press ALT+2 .Enter DDC 2B test interface. Choose DDC Card 4.Press F8 to choose corresponding model.DAT(VA905_A.DAT press“ENTER” key) VA905_A means the DDC under analog mode. VA905_D means the DDC under digital mode. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 32
5.Press F9 enter the download interface 6.Key in the serial number or use the barcode reader to scan the barcode of the monitor, and press “ENTER” key. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 33
7.The successful picture is as follows. ”Compare EDID :OK! Press any key to continue”. 8.Let VA905 active, then see the information in OSD, it shows ”Serial NO : PTS052101075” Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 34
4.4 check method Use ViewSonic EDID Editor Connect the VA905 to PC with VGA Cable. Excute the EDID Editor, then Press Ctrl+F5. If the DDC is correct, you can see the information as follow: Confidential - Do Not Copy ViewSonic Corporation...
- PC (Personal Computer) with SXGA resolution and sound card / Pattern Generator 2. Main Procedure Star Power -on A.Power Circuit Power LED ok? Troubleshooting B.Performance Is display performance ok? Troubleshooting C.Function Is function adjustment ok? Troubleshooting D.Speakers Are Speakers all right? Troubleshooting Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 36
Change Is screen black? Power Board Main Board Main Board Replug Change Change Is screen white? or Change Main Board LCD Panel FPC Cable Change Change Abnormal Color? Main Board LCD Panel Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 37
Ghost image disappears, go to “Yes”; else, go to “No.” 2. Check the compatibility on the computer. If it is compatibility problem, feedback the information to ViewSonic; else, go to “No.” Confidential - Do Not Copy ViewSonic Corporation...
Page 38
2.3 C. Function Troubleshooting Start Change Change Control Board Main Board 2.4 D. Speakers Troubleshooting Start Change Change Speakers Power Board Confidential - Do Not Copy ViewSonic Corporation VA905...
1.4 Place the monitor into the carton and then put all the accessories into the carton. At last, close the carton and seal it with tape. (Figure 4) Power code VGA Cable DVI Cable Stand Unit VA905 Monitor Audio Cable Figure 3 Figure 4 User’s Guide Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 49
Disassembly Procedure 1. Disassembly of Stand, Hinge unit from Monitor Detach Stand Unit from the monitor. Remove the Dust cover. Unscrew four screws that secure Hinge Unit. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 50
2. Disassembly of Front Cover and Rear Cover Unscrew three screws that secure Rear Cover to remove Front Cover. Unscrew five screws to remove Rear Cover. Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 51
Shielding Plate 3.2. Unscrew 6 screws, 2 hexagon screws and disconnect the wires to remove Main Board. Main Board 3.3. Unscrew 6 screws and disconnect the wires to remove Power Board. Power Board Confidential - Do Not Copy ViewSonic Corporation VA905...
Page 52
Lay Panel Unit facedown and unscrew 4 screws on its right and left sides to remove Panel Unit. Panel Unit 3.5. Unscrew 2 screws to remove Key Pad and remove the Speaker. Keypad Board Panel Bracket Speaker Confidential - Do Not Copy ViewSonic Corporation VA905...
Add.: Fax: Tel: E-mail: After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes (marc.maupin@viewsonic.com) Confidential - Do Not Copy...
Need help?
Do you have a question about the VS10805 and is the answer not in the manual?
Questions and answers