Getting Started
Rear View of the Product
Item
1
Power (AC input)
2
Service (USB Terminal)
3
HDMI 1 Input Terminal
4
HDMI 2 Input Terminal
5
VGA signal input
6
YPbPr 2 signal input
7
YPbPr 1 signal input
Composite Video input
8
9
S-Video input
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Description
Plug-in the supplied AC Power cord and connect to the AC
input power source.
This port is only for firmware upgrade.
Connect this port to the HDMI output of A/V device.
Connect this port to the HDMI output of A/V device.
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the
LCD TV.
Connect this port to the YPbPr output of A/V device.
Connect this port to the YPbPr output of A/V device.
Connect this jack to the composite video output connectors on
your A/V equipment.
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
15
N2635w