Rear View Connections (Alternate Version) - Sceptre X322BV-MQCC User Manual

Hd display

Hide thumbs

Table Of Contents

Table of Contents

USB – USB connects to USB flash drives for playing music and

picture. The USB port is also used for updating the display's

firmware.

TV (optional) – This connection is for analog cable without the cable

box or over-the-airwave antennas. The tuner is a hybrid tuner that

tunes to both analog and digital channels. This connection uses

coaxial RF cable. For over-the airwave digital stations please check

http://www.antennaweb.org. This tuner DOES NOT support QAM.

For digital cable, you WILL need a cable box.

HDMI1-3 – HDMI connects to devices that use HDMI cable, such as

Blu-ray or HD DVD player, or HD cable / satellite set-top box. This

connection port receives pure digital audio and high definition signal

through one single cable. This port also can accept a HDCP video

device for video. HDMI 2 also doubles as the MHL connection for cell

phones. MHL is a protocol where the display will show what your cell

phone screen shows. If your cell phone supports MHL you can

purchase a MHL cable from any electronic store and connect it to

HDMI 2 and also your cell phone. Make sure the display's source is

changed to HDMI 2 and turn on your cell phone. You should see an

image of your cell phone screen. HDMI 2 also supports ROKU™

streaming stick. Plug the ROKU stick to HDMI 2, and switch your

source to HDMI2. Afterwards use the purple colored buttons to

access ROKU functions.

PC Audio In - This connection port is for people who want to provide

audio to the display when using a PC or a DVI video device. The

sources use 3.5mm mini-jack audio cable.

VGA - This connection port connects to a PC for video using VGA

10.

cable. Be sure to connect your audio cable to the VGA Stereo input if

you want sound out of VGA video source.

Please Note:

This display features a power saving function which will turn off

•

the display automatically after 10 minutes of idling on a

connection with no signal. This feature is present on all

connection.

•

This display does NOT support QAM under (the optional) TV

tuner.