source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
HDMI 2 – HDMI connects to devices that use HDMI cable, such as
5.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
HDMI 3 – HDMI connects to devices that use HDMI cable, such as
6.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
7.
VGA - This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
8.
PC Audio In - This connection port is for people who want to provide
audio to the Display when using a PC or a DVI video device. The
sources use 3.5mm mini-jack audio cable.
DT (Optional) – This connection is for analog cable without the cable
9.
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
10. USB – USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the Display's
firmware.
Please Note:
•
This Display features a power saving function which will turn off
the Display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.
This Display does NOT support QAM under Display tuner.
•
TV Tuner is optional. It may not be equipped in your product.
•
Please check with seller, authorized distributor or Sceptre
Customer Services.
SCEPTRE Remote Control
- 19 -
www.SCEPTRE.com
SCEPTRE X32 User Manual