Table of Contents
Advertisement
Configuring Digital Piano Settings
Display Text
General >Ent
LCD Contrast
Auto Resume
Auto Power Off
Operation Lock
Half Pedal Pos.
Headphone Mode
Volume Sync EQ
Speaker Out
Master EQ
Factory Reset >Ent
Version
EN-44
Description
Other Digital Piano parameters
Digital Piano display contrast
Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them the
next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN, PLAY),
Concert Play song tempo, Speaker Out, Master EQ
Auto Power Off
Operation lock. Enable this setting when you want to
protect against unintentional button operations.
When this setting is turned on, the Digital Piano's
buttons (except for the P (Power) button and
buttons required for unlock) are locked, so no
operation can be performed.
Half pedal position
Headphone mode. The Headphone Mode
automatically performs timbre compensation while
headphones are being used to reproduce the natural
expanse of sound that reaches the ears when an
acoustic piano is played. The initial default setting is
"On".
• On: Enabled; Off: Disabled
Volume sync equalizer. Automatically performs
timbre compensation in accordance with the volume
level. This feature ensures that low range and/or
high range sounds are easier to hear, even at low
volume levels. The initial default setting is "Normal".
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano's speakers.
• Compensation is not performed while the Master
EQ setting is Line Out.
Speaker Out. Specifies whether sound should be
output from the built-in speakers.
• Auto: Enables built-in speaker output. Speaker
output is disabled while headphones are
connected.
• Off: Disables built-in speaker output.
Master Equalizer. Configures master equalizer
characteristic settings to adjust timbre.
• Speaker: Optimizes timbre for built-in speaker
output.
• Line Out: Optimizes timbre for line output.
Return system to initial factory defaults.
Shows the version of the firmware.
Go here for more
Settings
information
(See the page
Adjusting Display Contrast
to the right.)
(page EN-7)
Off
–
(Disabled),
On (Enabled)
(See the page
Auto Power Off (page EN-6)
to the right.)
Off
–
(Disabled),
On (Enabled)
(See the page
To adjust the half pedal
to the right.)
trigger position (page EN-12)
Off
–
(Disabled),
On (Enabled)
Off
–
(Disabled),
Weak,
Normal,
Strong
Auto,
–
Off
(Disabled)
Speaker,
–
Line Out
–
Returning the Digital Piano
to Its Factory Default Settings
(page EN-7)
–
–
Advertisement
Table of Contents
