LG F70E1UDNK9 Owner's Manual page 36

Symptoms
Control panel has powered off
due to inactivity.
Washing machine is
unplugged.
Water supply is turned off.
Controls are not set properly.
Door or drawer is open.
Circuit breaker/fuse is
tripped/blown.
Washing machine
will not operate
Control needs to be reset.
Start/Pause was not pressed
after a cycle was set.
Extremely low water pressure.
Washing machine is too cold.
Reason
• This is normal. Press the Power button to
turn the washing machine on.
• Make sure cord is plugged securely into a
working outlet.
• Turn both hot and cold taps fully on.
• Make sure the cycle was set correctly,
close the door and press the Start/Pause
button.
• Close the door and drawer make sure
that nothing is caught under the door
preventing it from closing completely.
• Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
washing machine should be on a
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
• Press the Power button, then re-select the
desired programme and press the Start/
Pause button.
• Press the Power button then re-select the
desired programme and press the Start/
Pause button. If the Start/Pause button
is not pressed within a certain time, the
appliance will shut off and all settings will
be lost.
• Check another tap in the house to make
sure that household water pressure is
adequate.
• If the washing machine has been exposed
to temperatures below freezing for an
extended period of time, allow it to warm
up before pressing the Power button.
EN
Solution
35