Hybrid Mode S N; Return Interval S N; Proximity Sensitivity S N; Hdmi It Contents S N - LG 72WS70MS-B User Manual

62
96. Hybrid Mode (Command: s n, 96)
Sets display's transparency mode.
Transmission
[s][n][ ][Set ID][ ][9][6][ ][Data][Cr]
Data 00 : Hybrid (effect: Off)
01 : Hybrid (effect: Full white)
02 : Semi-Transparent
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][6][Data][x]
* This feature may not be supported for some models.
97. Return Interval (Command: s n, 97)
Controls length of time transparent mode is maintained.
Transmission
[s][n][ ][Set ID][ ][9][7][ ][Data][Cr]
Data 00 to 0a: Time maintained 0 to 10
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][7][Data][x]
* This feature may not be supported for some models.
98. Proximity Sensitivity (Command: s n, 98)
Sets proximity sensor sensitivity.
Transmission
[s][n][ ][Set ID][ ][9][8][ ][Data][Cr]
Data 00 : High
01 : Mid
02: Low
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][8][Data][x]
* This feature may not be supported for some models.
99. HDMI IT Contents (Command: s n, 99)
Uses HDMI data to automatically set Picture Mode.
Transmission
[s][n][ ][Set ID][ ][9][9][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][9][Data][x]
* This feature may not be supported for some models.
100. UPnP Mode (Command: s n, 9c)
Sets the desired UPnP mode.
Transmission
[s][n][ ][Set ID][ ][9][c][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][c][Data][x]
*This feature may not be supported on some models.
*If the UPnP Mode is changed, a reboot will occur.
101. Model Name check (Command: f v)
Checks the Model Name.
Transmission
[f ][v][ ][Set ID][ ][Data][Cr]
Data FF: Check product serial number
Acknowledgment
[v][ ][Set ID][ ][OK/NG][Data][x]
*Data is in hexadecimal ASCII code.