Screen Off K D; Tile Mode D D; Check Tile Mode D Z; Tile Id D I - LG 72WS70MS-B User Manual

Monitor signage
Hide thumbs Also See for 72WS70MS-B:
Table of Contents

Advertisement

50
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
00: turns the screen on
01: turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported on some models.
** Dual-screen models must use the screen off commands
in 88. Dual Screen Off.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
00 to FF: The first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
** The maximum value may differ depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: checks the tile mode
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
00: tile mode off
01: tile mode on
Data2
00 to 0F: tile column
Data3
00 to 0F: tile row
* It may not be supported depending on the model.
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
01 to E1: Tile ID 1 to 225**
FF: checks the tile ID
** The data value cannot exceed the value of row x
column.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x
column is entered (except 0xFF),
ACK becomes NG.
* It may not be supported depending on the model.
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image that
would normally be displayed in the gap between the monitors
is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
[f ][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]

Advertisement

Table of Contents
loading

This manual is also suitable for:

32sm5kc-b42ls75c-b49xs2e-b49xf3e-b55ew5f-a84ws70bd-b

Table of Contents