Communication Parameter
Baud Rate: 9600 BPS
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
NOTE
When using three-wire connections (non-
y
standard), an IR daisy chain cannot be used.
Be sure to only use the provided gender to
y
connect properly.
When monitors connected via Daisy Chain (that
y
controls multiple monitors) are turned off and
on successively, some monitors may not turn
on. In this case, you can turn those monitors on
by pressing the MONITOR ON button, not the
POWER button.
(POWER)
MONITOR ON
37
BACK
EXIT
TILE
ID
ON
OFF