Daisy-Chain Function - Philips 246B1/00 User Manual

6. Daisy-chain function

6. Daisy-chain function
DisplayPort Multi-Stream feature
enables multiple monitor connections.
This Philips display is equipped with
DisplayPort interface and DisplayPort
over USB-C which enables daisy-
chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable
from one display to the next.
To daisy-chain monitors, first to check
below:
Make sure the GPU on your PC support
DisplayPort MST (Multi-stream
transport).
Note
The maximum number of connectible
monitors may vary depending on GPU
performance.
Please check with your graphic card
vendor and always update your graphic
card driver.
DisplayPort multi-streaming over
DisplayPort
PC
Display Resolution Maximum number of external
monitors that can be supported
Extend mode (DisplayPort)
2560 x 1440 @ 60Hz 2
DisplayPort multi-streaming over USB
Type-C
PC
Display Link Rate
Resolution
2560 x 1440 HBR2
@60Hz
HBR3
Note
1. To check link rate: press
select Setup > information. The
screen will show HBR3, otherwise,
the link rate is HBR2.
2. We recommend to set USB Setting
to USB 3.2, press
USB Settings > USB, then select USB
3.2 which supports the LAN speed
to 1G.
3. Depends on the graphic card
capability, you may connect
maximum 3 external monitors.
To select one of DP Out Multi-stream
modes:
Press button, select Setup > DP Out
Multi-stream > Extend .


 
 

18
*1
USB Maximum number
*2
Settings of external
monitors that can
be supported
*3
USB 2.0 2
USB 3.2 1
USB 2.0 2
USB 3.2 2
button,
button, select

 

 
  
 

