Table of Contents
Advertisement
INDOOR UNIT
11
8
4
2
1
12
13
1. Remote control unit.
2. Sensor: Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Receiver: This section picks up infrared signals from the
remote control unit (Transmitter).
4. Air outlet: Conditioned air is blown out of the air conditioner
through the air outlet (four flaps).
5. Air intake latch, on two sides.
Names of parts
10
9
3
6. Air intake grille: Air from the room is drawn into this section and
7. Air filter.
8. Suspension brackets.
9. Refrigerant couplings.
10. Condensate drain connection.
11. Electric junction box.
12. Sensor: Detects the room temperature around the unit; when
13. Operation selector.
3
15
14
16
The OFF position does not disconnect the power. Use the
main power switch to turn off power completely.
TEST Position:
14. Operation lamp (OPER): This lamp lights when the air
15. SERVICE lamp: When a fault occurs in the air conditioner, this
16. TIMER lamp: This lamp lights when the system is being
MODELS CAF
5
6
passes through air filter which removes dust.
the remote control unit is not active the air conditioner will be
set by the detected temperature.
ON Position:
In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
OFF Position:
Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
WARNING
CAUTION
This position is used only for servicing the
air conditioner, so don't leave the selector in
this position for normal operation.
conditioner is running.
lamp turns on or flashes in combination with the other two
lamps to indicate the type of fault.
controlled by the timer.
7
5
Advertisement
Table of Contents
