Wireless Remote Control - ViewSonic CD4230 VS12541 User Manual

Wireless Remote Control

1
5
7
10
12
14
16
ViewSonic CD4230
MUTE button
1
To switch the mute function on/off.
2
Power button
2
Switches the power on/off.
*If the Power indicator on the monitor is not
glowing, then no controls will work.
3
Number buttons
3
These buttons are not used and do not work.
4 UP button
4
Acts as
6
select the adjustment with OSD menu.
8
INPUT button
5
9
Selects from input signal: [CVBS1], [CVBS2], [S-
Video], [VGA], [YPbPr], [DVI] and [HDMI].
11
13
EXIT button
6
15
Turns to previous menu with OSD menu.
17
/Volume - button
7
• Decreases the audio output level.
• Acts as
to select the adjustment with OSD menu.
/Volume + button
8
• Increases the audio output level.
• Acts as
right to select the adjustment with OSD menu.
9 ENTER button
Acts as SET button with OSD menu.
Information button
10
Displays information about the current status of the
monitor.
MENU button
11
Displays or hides the OSD menu.
VGA button
12
Selects VGA as the input signal.
13 DOWN button
Acts as
down to select the adjustment with OSD menu.
14 DVI button
Selects DVI as the input signal.
AV button
15
Selects CVBS1 as the input signal.
16 YPbPr button
Selects YPbPr as the input signal.
HDMI button
17
Selects HDMI as the input signal.
button to move the highlighted area up to
button to move the highlighted area left
button to move the highlighted area
button to move the highlighted area
9