Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
9.) Salt Lack Warning indicator
In order to see whether softening salt in your machine is sufficient or not, check salt lack warning light on the
display.When salt light warning light starts coming on, you need to fill in the salt chamber.
Rinse aid Lack Warning indicator
In order to check that there is sufficient rinse aid in your machine check rinse aid lack warning light on the
display.When rinse aid warning light starts coming on , fill in rinse aid chamber.
10.) Program Monitor Lights
Program flow can be monitored via program monitor lights on control panel.
• Wash
• Rinse
• Dry
• End
11.) Remaining Time Indicator
Remaining Time Indicator displays the program times and remaining time during the program is in operation. In
addition, you can adjust program delay time by pressing the buttons on the indicator before program starts. If
you want to change delay time, you can set the time by pressing Start/Pause button and using buttons on the
indicator. Press Start/Pausebutton again in order to activate.
Use of Child Lock
On order to activate the child lock, press both "tablet" and "half load" buttons at the same time for 3 seconds. In
the meantime, you will see "CL" for 2 seconds on the Remaining time display. In order to deactivate, press both
"tablet" and "half load" buttons at the same time for 3 seconds. "CL" will flash two times.
EN-24
Advertisement
Table of Contents
