Important Note To Installer; Step-By-Step Installation - Samsung WA54M8750 Series User Manual

Important note to installer

Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation flow chart
Selecting a
location
Running a test cycle
Run RINSE+SPIN
with small amount of
laundry (about 4-5
towels) as a test cycle
Check again before steps.

Step-by-step installation

STEP 1 Selecting a location
NOTE
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as oil or gas.
Has enough space so that the washer doesn't rest on its power cord.
•
WA8700M_DC68-03774B-04_EN.indd 23
Removing the
shipping bolts Connecting the
(Front loading water and drain
washers only)
Does your washer
vibrate?
YES
Adjusting the
leveling feet
NO
Running
Calibration Mode
Powering your
washing machine
Finishing the
installation
English 23
2019-02-14 5:37:13