Notice Before Use - German pool PRO-P10 User Manual

Notice Before Use

Important
For safety purposes, you should read the instructions carefully before using the appliance for the first time. Save
the instructions for future reference.
The appliance is designed for domestic use and may only be installed and operated in accordance with this
instruction manual.
1. Before plugging in the appliance, check that the electrical rating shown on the rating plate corresponds with
your house electricity supply.
2. Never immerse the unit base of the appliance in water or other fluid, or rinse it under the tap, to avoid risk of
short-circuit or electric shock. If there is water inside the unit base, please contact GermanPool or a licensed
technician for repair.
3. Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs with damp cloth, or plug
in with wet hands.
4. Plug the appliance to the wall outlet properly & securely. Loose plug may lead to overheat or electric shock.
5. If the power cord is damaged, it must be replaced by the manufacturer or its service agents or qualified
electricians in order to avoid a hazard.
6. Never leave the appliance unattended.
7. Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe
personal injury and/or damage.
8. Do not run the appliance without loading the blender jar.
9. To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
10. Do not expose the appliance to source of heat such as a radiator or direct sunlight. For good ventilation, do not
place cloth underneath the appliance.
11. The appliance is for indoor use only.
12. Always operate with the lid in place. When processing hot beverages, properly secure the lid and measuring
cup in place to avoid scalding due to spraying of hot liquids.
13. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or any individual lack of experience and knowledge, unless they have been given supervision or
instruction by a person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
14. Switch off the appliance and disconnect from supply before changing accessories. Also, unplug the power cord
from the wall outlet when appliance is not in use, before putting on or taking off parts, and before cleaning.
15. If the motor has overheated, the temperature monitoring system will be triggered and the motor will stop.
Switch off the appliance and let the motor cool down. The motor temperature monitoring system will reset after
the food processor is unplugged from wall socket for 45 minutes.
16. The blade is very sharp. Use caution when handling the blade. Do not attempt to disassemble the blade
assembly or touch any rotating parts.
17. Any servicing should be performed by an authorized service representative. Do not attempt to disassemble,
repair or modify the appliance.
P.4