Advertisement
Available languages
Available languages
OPERATION
14. MEMORY FUNCTION
(1)
Press Memory to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
(2)
Press Memory until your desired procedure number appears in the display.
Press
to begin it. A maximum of two cooking stages can be set for each
procedure.
(3)
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
a.
Press Memory twice; screen displays 2.
b.
Press Time Cook , then press "3" , "2" and "0" in order.
c.
Press Power Level once, then press "8" for "PL 8" to display.
d.
Press
to save the procedure. Oven beeps once.
Or press
directly to save and start cooking.
e.
To choose the procedure from the memory list, press Memory twice.
Screen will display "2". Press
NOTE:
Auto Menu cannot be set in Memory function.
15. TURN ON/OFF THE BUZZER SOUND
It is default that the buzzer sounds is open.In waiting state, long pressing on number
8 for 3 seconds, it sounds a long beep,
When the sounds turn off, long pressing on 8 for 3 seconds, it sounds a long beep
and the sound turn off. All the buttons has no beep when they are pressed, including
the ending cooking sounds is turn off too.
Note: All models has mut e function and energy-saved function.
This function can work under lock function too.
to run procedure.
turns off the sound.
EN-22
Advertisement
