Superior Fireplaces VRT4032ZEP Manual page 18

INSTALLING LOGS
WARNING: Failure to position
the parts in accordance with these
diagrams or failure to use only
parts specifi cally approved with
this heater may result in property
damage or personal injury.
CAUTION: Do not remove
the data plates attached to the
heater base assembly. The data
plates contain important safety
and warranty information.
1. Place fi ber ramp log in center of chassis
as shown in Figure 28. The fi ber ramp
log can be identifi ed by the shape and
much lighter weight when compared to
the other logs. The log must sit fl at on the
black sheet metal and behind the left metal
tab as shown. Make sure the side marked
''BOTTOM'' is setting down.
2. Place front left and front right logs as shown
in Figure 29.
18
INSTALLATION
Continued
Ramp Log
Metal
Tab
Figure 28 - Installing Fiber Ramp Log
Left Front
Log
Figure 29 - Installing Left/Right Front Logs
SuperiorFireplaces.us.com
Right Front Log
900719-00C