Quick Start - Universal Electronics Cricket Kid's Remote Control User Manual

Kids Remote 2006.fm Page 3 Tuesday, March 6, 2007 3:52 PM

QUICK START

Cricket was designed specifically for children ages three
or older, with safety and simplicity in mind. Cricket
offers a simple means of control over what content your
children are exposed to when they watch television.
Basic setup is very simple, so you can give the remote to
the children in your household to begin using in just a
few minutes.
Step 1: Installing Batteries
Using a Phillips screwdriver, remove the battery cover
from the back side of the remote control. Insert 2 AAA
batteries as shown below. Do not replace cover on
battery compartment until programming is complete.
Step 2: Set Remote to Programming Mode
Set the switch located in the battery compartment to the
middle position P to enter programming mode as
shown below.
www.urcsupport.com/cricket
3