Honda CRF250RL 2017 Owner's Manual page 68

Engine Oil Changing Engine Oil & Filter
u
Install a new oil filter with the "OUT-SIDE"
8.
mark facing out.
Install the spring into the oil filter cover,
9.
and then install a new gasket and oil filter
cover by tightening the oil filter cover
bolts.
Torque: 7 lbf·ft (10 N·m, 1.0 kgf·m)
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
Fill the crankcase with the recommended oil
11.
( P. 48, P. 129) and install the oil fill cap.
2 2
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
66
Check the oil level.
12.
Check that there are no oil leaks.
13.
Install the under cowl.
14.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Spring
Oil filter cover
Gasket
Oil filter cover bolts
P. 63
2
P. 57
2
Oil filter
"OUT-SIDE" mark