Honda CRF250RL 2017 Owner's Manual page 64

Spark Arrester
u
Remove the spark arrester mounting
5.
bolts, spark arrester and gasket from the
muffler.
Use a brush to remove carbon deposits
6.
from the spark arrester screen. Be careful
to avoid damaging the spark arrester
screen. The spark arrester must be free of
breaks and holes. Replace, if necessary.
Check the gasket. Replace, if necessary.
62
Cleaning the Spark Arrester
Spark arrester screen
Install the gasket and the spark arrester,
7.
and tighten the spark arrester mounting
bolts.
Torque: 6.6 lbf·ft (9 N·m, 0.9 kgf·m)
Install the tail cap cover and tighten the
8.
tail cap cover bolts.
Torque: 3.9 lbf·ft (5.25 N·m, 0.5 kgf·m)
Install the muffler cover and tighten the
9.
muffler cover bolts.
Torque: 1.1 lbf·ft (1.5 N·m, 0.2 kgf·m)
Install the right side cover.
10.
P. 56
2