Bosch KGN36HI32/05 Instructions For Use Manual page 43

Press + button freezer compartment
3.
to connect the appliance to the app.
The freezer compartment
temperature display shows an
animation and the Wi-Fi connection
display lights up.
Open the app and wait until the
4.
refrigerator is displayed.
Use Add to confirm the connection
between the app and the
refrigerator.
If the refrigerator is not automatically
displayed, click on Add appliance in
the app and follow the instructions.
As soon as your refrigerator is
displayed, add it with +.
Follow the instructions in the app
5.
until the process is complete.
The refrigerator compartment
temperature display shows PA and
the freezer compartment
temperature display shows On.
The refrigerator has been connected
to the app.
If the connection fails, check whether
the mobile device is connected to
the home network (WLAN).
Then try to establish the connection
again.
If Er appears in the freezer
compartment temperature display,
reset the Home Connect settings.
On resetting, all Home
Note:
Connect settings are reset.
Verify signal strength
You should verify the signal strength if
no connection can be established.
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows SI. In the freezer
compartment temperature display, a
value appears between 0 (no signal)
and 3 (full signal).
The signal strength should be at
least 2. If the signal strength is too
weak, the connection may be
interrupted.
Place the router and refrigerator
–
closer together.
Ensure that the connection is not
–
interfered with by screening walls.
Install a repeater to make the
–
signal stronger.
Activating the cameras
If the refrigerator is connected to the
home network (WLAN) and to the Home
Connect app, you can activate the
cameras:
Press alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Keep pressing + button refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows CA and the freezer
compartment temperature display
shows OF.
Press + button freezer compartment.
3.
The freezer compartment
temperature display shows On and
the Wi-Fi connection display lights
up.
The cameras are activated.
Notes
If the cameras are activated and the
■
refrigerator contents are interrogated
frequently via the app, this will result
in increased data transfer.
Uploading the photos takes up to
■
three minutes.
Various external factors in the home
■
network and the Internet can cause
transmission problems and pictures
to be discarded. This has no effect
on the basic functions of the
appliance.
Home Connect en
43