Listening To The Radio; Auto Search Memory; Storing And Recalling Broadcast Frequencies; To Scan The Preset Stations - LG LAC5800R Manual

Listening to the radio

1. Select a source to tuner.
2. Select a band.
3. Auto seek.
Manual seek.
Listening to the radio - more you can do

Auto search memory

Press U U /AS. The six strongest broadcast frequencies will be stored under preset
button 1-6 in the order of their signal strength.To cancel, press U U /AS.

Storing and recalling broadcast frequencies

1 Press BAND to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.

To scan the preset stations

Press u u /PS. Each preset station appears. To cancel, press u u /PS.

To tune in the preset stations

Press BAND to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
When a station is stored on the preset numbers on which another station of the
same band has already been preset, the previously preset station is automati-
cally erased.
ON PLAYER ON REMOTE
SRC
SRC
BAND
3 / BAND 3
-?b / B?+ ?mm/MM?
Press and hold
Press and hold
-?b / B?+
?mm/MM?

Connecting USB device

1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.

Moving to another drive

When connecting this unit to multi reader, press BAND/DRIVE (BAND/DRV on
remote control) to go to the next drive. Each time you press the button, the driv-
er modes changes.
Note
If the USB device is already connected, press SRC (SRC on remote control.) to
select a source to USB.

Connecting an Auxiliary Equipment

MP3 Player, etc
1. Select a source to AUX.
2. Play the connected Auxiliary
Equipment.
3. Adjust the volume.
ON PLAYER ON REMOTE
- -
- -
Rotate PWR
VOLUME
Auxiliary input
Line out
ON PLAYER ON REMOTE
SRC SRC
- -
Rotate PWR
VOLUME
CAR CD/MP3/WMA Receiver 9