Table of Contents
Advertisement
Turning the power on/off
Press M
N for about 2 seconds.
Date and time
1
MMENUN (right soft key) #101
2
Enter the current date, month, and year.
a MOKN
Example: 15 July, 2014
15 07 14
R You can select the date format by
pressing #:
– dd/mm/yy (date/month/year)
– yy/mm/dd
3
Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing *.
4
MOKN a M
N
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 39 for details.
1
MMENUN (right soft key) #302
2
MbN: "Yes" a MOKN
3
Record a greeting message. a MSTOPN
a M
N
Other settings
Smart Function Key (
The Smart Function Key (
on the bottom of the handset and informs you
TGH222_23AZ(en)_0314_ver101.pdf 13
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the
you can:
– Answer the call (outside call, intercom).
(page 15, 17)
– Stop paging.
– Stop the alarm sound. (page 29)
n When the
standby mode, you can:
– Listen to new messages. (page 40)
– View the caller list when there are
missed calls. (page 37)
To activate these features, their Smart
Function Key must be "On". (page 13)
Using the Smart Function Key (
key)
When the
press M
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
Function Key, the speakerphone is
activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
Note:
R While key lock is on (page 17), incoming
calls can be answered, but the following
features are disabled even when the
indicator flashes slowly.
– Listen to new messages. (page 40)
– View the caller list when there are
missed calls. (page 37)
key)
Setting the Smart Function Key
key) is located
The Smart Function Key for the following
features must be "On".
Getting Started
indicator flashes rapidly,
indicator flashes slowly in
indicator flashes rapidly/slowly,
N.
3/14/2014 10:01:16 AM
13
Advertisement
Table of Contents
