Table of Contents
Advertisement
Installation
This section describes the procedure for installing the software.
To perform installation, the IP address or host name of the product are required.
Confirm the IP address or host name of the product from the administrator.
If any other software or anti-virus programs are running, exit them before starting the
installation.
1
Start Windows, and load the Discproducer Utility & Documents Disc (DVD-ROM)
supplied with the product into an optical drive of the client computer that can read DVDs.
When the AutoPlay window is displayed, click [Run InstallNavi.EXE] to proceed with
Notes
operation.
2
Click [EPSON Total Disc Maker] when the screen shown below is displayed.
If the screen is not displayed, click [Start] (
the DVD. Next, double-click the InstallNavi.EXE icon in the DVD-ROM.
When [User Account Control] screen is displayed, click [Allow]. When asked for an
Notes
administrator password, enter the password to proceed with operation.
28
) - [Computer], and double-click the DVD -ROM icon to open
Advertisement
Table of Contents
