Components Of S5U1C330M2S Package; Installation - Epson S1C33 Series Operation Manual

1 S5U1C330M2S PACKAGE

1.2 Components of S5U1C330M2S Package

The following lists the contents of S5U1C330M2S Package:
When unpacking, make sure that all of the following components are included.
(1) Tool disk (3.5' FD for PC/AT, 1.44MB)
(2) S1C33 Family Debug Monitor Operation Manual (this manual)
(3) Warranty

1.3 Installation

S5U1C330M2S needs to be linked with the user program as it is implemented. Therefore, make sure all tools of the
"S1C33 Family C Compiler Package" have been installed in the personal computer and are ready to run before
installing the S5U1C330M2S files. The basic system configuration is described below.
Personal computer:
IBM PC/AT or compatible
(PC with Pentium 90 MHz or higher and 32MB or more memory recommended)
One channel of the serial port is used to communicate with the debug monitor.
OS:
Windows95, Windows NT 4.0 or higher version (English version or Japanese version)
All the S5U1C330M2S files are supplied on one floppy disk. Execute the self-extract file "mon33vXX.exe" on the
FD to install the files. ("XX" in the file name represents the version number, for example, "mon33v10.exe" is the
file name of S5U1C330M2S ver. 1.0.)
When "mon33vXX.exe" is started up by double-clicking the file icon, the following dialog box appears.
The following lists the configuration of directories and files after copying.
(root)\ (default: C:\E0C33\MON33\)
readme.txt
readmeja.txt
lib\ ..... MON33 library
mon33ch0.lib
mon33ch1.lib
mon33.lib
mon33ice.lib
2
Enter a path/folder name in the text box then click
[Unzip]. The specified folder will be created and all the
files will be copied to the folder.
When the specified folder already exists on the specified
path, the folder will be overwritten without prompting if
[Overwrite Files Without Prompting] is checked.
Supplementary explanation (in English)
Supplementary explanation (in Japanese)
S5U1C330M2S library that uses the serial I/F Ch.0 on the S1C33xxx
S5U1C330M2S library that uses the serial I/F Ch.1 on the S1C33xxx
S5U1C330M2S library that does not use a serial I/F on the S1C33xxx
... These libraries cannot be used with the ICE or ICD.
Normally, either "mon33ch0.lib" or "mon33ch1.lib" is used according to
the serial I/F channel used. Use "mon33.lib" when providing a serial I/O
circuit separately and when not using the S5U1C330MxD1 board.
Library that does not use a serial I/F on the S1C33xxx for debugging the
S5U1C330M2S using the ICE or ICD
EPSON
1
2 (1 English/1 Japanese)
2 (1 English/1 Japanese)
S1C33 FAMILY DEBUG MONITOR
OPERATION MANUAL