Advertisement
User instructions
RINSE AID SETTING
(available in all programs except the soak program)
The setting can be adjusted using the PROGRAM DELAY BUTTON.
To access the programming environment, the appliance must be turned
on with the door closed. Then proceed as follows:
press the PROGRAM DELAY button
on the display, followed by the number currently set (e.g. b5)
press the PROGRAM DELAY
needed to select the right setting level for amount rinse aid (b0, b1,
b2, b3, b4, b5, b5);
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
b0
b1
b2
b3
b4
b5
Default settings: b4 - 5ml
The amount of rinse aid must be increased if the washed dishes
appear dull or feature circular stains.
If, on the other hand, the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid setting.
RINSE AID ADJUSTMENT TABLE
until the b symbol appears
button the number of times
0 – not dispensed
minimum 2 ml
3 ml
4 ml
5 ml
maximum 6 ml
25
Advertisement
