Download
Share
Print this page
LG 55UN7300PUC Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. 55UN7300PUC
  6. Service manual

LG 55UN7300PUC Service Manual

Hide thumbs Also See for 55UN7300PUC:

Advertisement

Quick Links

Download this manual
LED TV
SERVICE MANUAL
CHASSIS : UAX3E
MODEL : 55UN7300PUC/UF
MODEL :
MODEL :
CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
P/NO : MFL71703804 (2002-REV01)
Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means),
publication, modification, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you
have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual.
The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service
Manual.
Copyright © 2020 LG Electronics Inc. All rights reserved. Only training and service purposes.
55UN7300AUD
55UN7300PUB

Advertisement

loading

Related Manuals for LG 55UN7300PUC

Summary of Contents for LG 55UN7300PUC

  • Page 1 Service Manual is STRICTLY PROHIBITED unless you have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual. The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.
  • Page 2 SOFTWARE UPDATE ................9 BLOCK DIAGRAM ................. 10 EXPLODED VIEW .................. 11 ASSEMBLY / DISASSEMBLY GUIDE ........... 13 TROUBLE SHOOTING GUIDE ..........APPENDIX - 2 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 3: Safety Precautions

    When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer. - 3 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 4: Servicing Precautions

    - 4 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 5 1. Clip each fuse or resistor lead at top of the circuit board hollow stake. 2. Securely crimp the leads of replacement component around notch at stake top. - 5 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 6: Specification

    AV and DVI use same jack ; SPDIF out Optical Audio out Rear (1EA), HeadPhone HeadPhone out USB Input EMF, DivX HD, For SVC (download) JPEG, MP3, DivX HD - 6 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 7 25.12 SDTV 480P 720*480 31.47 59.94 SDTV 480P 720*480 31.5 27.02 SDTV 480P 720*576 31.25 SDTV 576P 1280*720 44.96 59.94 74.17 HDTV 720P - 7 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 8 8K Model Only. 7680*4320 1188 8K Model Only. 7680*4320 2376 8K Model Only. 7680*4320 263.74 59.94 2376 8K Model Only. 7680*4320 2376 8K Model Only. - 8 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 9: Software Update

    (5) After finished the update, below Pop-up appear (6) Turn OFF the TV and On. Check the updated SW Version and Tool Option - 9 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 10: Block Diagram

    BLOCK DIAGRAM - 10 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 11 It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. - 11 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 12 EXPLODED VIEW(MODULE) IMPORTANT NOTICE MRC use only * MRC : Module Repair Center - 12 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 13 2. Insert the finger of the back cover bottom section triangle hole and disassemble it * Do not wear items that may damage the appearance of the product * SCREW TORQUE : 5 ~ 7Kgf.cm - 13 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 14 (Step 5) Disassemble the Case Top Screw (side screw) and Case Top. * Screw down 7 EA * Hook top 6EA / side L 5 EA / side R 5 EA - 14 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 15 (Step 9) Disassemble the DPS, LED Fixer & Reflector Sheet * Rotate the DPS to remove (9 EA) * Push LED fixer in back (4 EA) - 15 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 16 2) Press the LED Array on the surface of Cover Bottom. 3) Connect the CNT to the LED Array. * Finish the Attached LED Array (4 EA) - 16 - Copyright © LG Electronics Inc. All rights reserved. Only for training and service purposes.

  • Page 17: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 18 E. Noise Circuit noise, mechanical noise F. Exterior error Exterior defect First of all, Check whether there is SVC Bulletin in GSCS System for these model. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 19 ☞A4 & A2 Always check & record S/W Version and White Replace Main Board Re-enter White Balance value Balance value before replacing the Main Board Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 20 ☞A18 Check various Check and No Video/ voltages of Power Normal replace No audio Board (13.2V…) voltage? MAIN B/D Replace Power Board and repair parts Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 21 1. Reconnection 2. Install Booster S/W Upgrade Contact with signal distributor Normal or broadcaster (Cable or Air) Picture? Normal Picture? Replace Main B/D Close Close Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 22 Component device/ Cable cable error normal Request repair for external device/cable Check external External HDMI device and Replace Main/T-con B/D device/ Cable error cable normal Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 23 Replace screen? HDMI/ Screen (Check normal operation of Main /T-con External Input, Component, normal? RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 24 Measure voltage of each output of Power B/D Normal? Normal Replace Main B/D voltage? Normal Check ST-BY 7.8V Close voltage? ☞A18 Replace Power B/D Replace Power Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 25 Error? Normal? Abnormal Check for all 2- phase Replace Power B/D power out Abnormal Fix A/C cord & Outlet and check each 2 phase out Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 26 Reboot by SW down load function UNKNOWN No meaning (same as initial value) COMP_END OLED threshold voltage degradation(Compensation) completes. PNWASHDONE Power off by panel noise wash function complited. (OLED) Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 27 13.2V of Power Screen normal voltage Speaker off Board Cancel OFF Replace Power Board and repair parts Check Replace MAIN Board Disconnection Speaker disconnection Replace Speaker Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 28 (In case of Connect and check Normal External Input other external audio? signal error) device Check and fix external device Check and fix external device Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 29 Replace Main B/D (Power B/D don’t have problem) If R/C operate, Normal Close operating? Explain the customer cause is interference from light in room. Replace R/C Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 30 RF Receiver ver about 5sec Close is “00.00”? Replace MR20 Close Change the RF Receiver assy * If you conduct the loop at 3times, change the MR20. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 31 1pin Main B/D INSTART menu “NG”? ☞A24 Close Check & Repair Wifi cable connection ☞A4 Wi-Fi Mac value Close is “NG”? Change the Wifi assy Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 32 Recognition error - S/W Version HDMI/ Check and fix DVI, Optical Replace Main B/D Fix in Recognition external device/cable accordance error with technical information Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 33 “Part related to nose” in the Owner’s then proceed as shown in the solution manual Manual. (For models without any fix information, provide the description) Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 34 Revised date Zoom part with Module Replace module exterior damage damage Cabinet Replace cabinet damage Remote Replace remote control control damage Stand Replace stand dent Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 35 Exchange Module (1) ~ (3) Inverter/ Module A-8/11 A-9/11 ~ Only using Exchange T-Con (1) ~ (2) T-con model A-10/11 Exchange Power Board(PSU) A-11/11 Continue to the next page Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 36 Motion Remote operation checking method How to use the Service remote control A24-A26 E. Etc Check items after Main B/D replacement Adjustment Test pattern - ADJ Key Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 37 Check LCD back light with naked eye Content date After turning on the power and disassembling the case, check with the naked eye, whether you can see light from locations. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 38 2. Enter into White Balance. 3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 39 All Setting  Programmes  Programme Tuning & Settings  Manual Tuning All Settings When the signal is strong, use the attenuator (-10dB, - 15dB, -20dB etc.) Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 40 Version checking method Content date <ALL MODELS> 1. Checking method for remote control for adjustment 65UN81006LB Version Press the IN-START with the remote control for adjustment Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 41 1. Check the signal strength or check whether the screen is normal when the external device is connected. 2. After measuring each voltage from power supply, finally replace the MAIN BOARD. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 42 Revised Content connection diagram (1) date <ALL MODELS> As the part connecting to the external input, check the screen condition by signal Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 43 A. Video error_Color error symptom date Revised Content Check Link Cable(Vx1/EPI) reconnection condition date 43/49/55/65UN73 Check the contact condition of the Link Cable, especially dust or mis insertion. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 44 A. Video error_Color error symptom date Revised Content Check Link Cable(Vx1/EPI) reconnection condition date 50/60UN73 Check the contact condition of the Link Cable, especially dust or mis insertion. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 45 Screen darkness to disconnection of the FFC cable pin. G color transient due to poor FFC cable CABLE G Color Excessive connection A - 1/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 46 CABLE Color spread FFC connection problem CABLE Color spread FFC connection problem Due to foreign substance within CABLE Screen stop FFC PIN A - 2/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 47 Main IC problem Main Dark picture Dark left-side screen Top/bottom screen part Main Broken picture Picture problem due to tuner Inner side quality problem A - 3/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 48 Screen spread Screen corner appears blurry Main Color Spread Color spread on the screen Main Blurry Screen Blurry picture on the screen A - 4/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 49 Screen picture spread problem Screen problem No problem at the initial stage. Right-side Main During Heat run, right-side picture picture problem problem A - 5/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 50 BLU internal foreign matter inflow MODULE Internal matter 6 block image broken MODULE Image broken MODULE Image broken Screen sync signal broken A - 6/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 51 BLU Vertical spreading on cube screen in no MODULE Vertical smear signal MODULE Over color Screen contour part brightly Over color A - 7/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 52 Center of the screen 1 block dark MODULE Screen darkness MODULE Vertical bar Center Vertical Bar Darkness at the MODULE bottom of the MODULE internal BLU breakage screen A - 8/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 53 T-Con is defective and the picture below T-CON image broken the screen is broken A - 9/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 54 The entire screen is dark and bit noise T-CON Image Broken occurs The entire screen is dark and bit noise T-CON Image Broken occurs A - 10/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 55 Appendix : Exchange Power Board (PSU) No Light No picture/Sound Ok A - 11/11 Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 56 Established B. Power error _No power symptom date Revised Content Check front Power Indicator date ST-BY condition: On or Off Power ON condition: Turn Off Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 57 114 V 140 V ※ Depending on Model Power Board is different. all condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 58 100 V 124 V ※ Depending on Model Power Board is different. all condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 59 152 V 186 V ※ Depending on Model Power Board is different. all condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 60 LED B+ 175 V 215V ※ Depending on Model Power Board is different. all condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 61 244 V 299 V ※ Depending on Model Power Board is different. all condition meets, Power Board OK. But Interface(P801, P201) and Spec is same Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 62 <ALL MODELS> 65UN81006LB K6LP Entry method 1. Press the IN-START button of the remote control for adjustment. 2. Check the entry into adjustment item 3. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 63 1. Press the Setting button on the remote control 2. Select the Sound function of the Menu 3. Select the Sound Out 4. Select TV Speaker Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 64 3. Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound when you touch the GND and output terminal, the speaker is normal. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 65 2. Check the standby 3.5V on the terminal 6 pin. (③) 3. AS checking the Pre-Amp(IR LED light), the power is in ON condition, an Analog Tester needle should move slowly, otherwise, it’s defective. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 66 Checking order to check motion remote/wifi KEY1 Checking order 1. Check BT/Wifi cable condition between BT/Wifi assy & Main board. 2. Check the 3.5V on the terminal 22. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 67 Error Established E. Etc symptom date Revised Content How to use the Service remote control date 1. How to access the remote control 65UN81006LB K6LP Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 68 Digital EYE function ON/OFF For some Model, access to the Test Pattern TILT Used for screen tilting change (Access to the old PDP control mode) Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 69 Connects to external input 1,2,3 COMP1,2 (Added function) Connects to Component 1,2 HDMI1,2,3,4 Connects to HDMI 1,2,3,4 (Add function) DVI (Add function) Connects to DVI Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 70 - Record the R, G, B (GAIN, Cut) value of the color temperature before main board replacement. After replacing the main board, key in the recorded value. Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.
  • Page 71 You can view 9 types of patterns using the ADJ Key Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..) 4.Video error (Classification of MODULE or Main-B/D!) Copyright © 2020 LG Electronics Inc. All rights reserved. Only for training and service purposes.

This manual is also suitable for:

55un7300puf55un7300aud55un7300pub