Toshiba EM245A5C-BS Instructions Manual page 24

OPERATION
10. MEMORY FUNCTION
(1)
Press Favorite to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
(2)
Press Favorite until your desired procedure number appears in the display.
Press to begin it. A maximum of two cooking stages can be set for each
procedure.
(3)
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
a.
Press Favorite twice; screen displays 2.
b.
Press Cook Time , then press "3" , "2" and "0" in order.
c.
Press Power once, then press "8" for "PL 8" to display.
d.
Press to save the procedure. Oven beeps once.
Or press directly to save and start cooking.
e.
To choose the procedure from the memory list, press Favorite twice.
Screen will display "2". Press
Auto Menu cannot be set in Memory function.
11.Muti-Stage Cooking
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the rst stage.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
a.
Press Favorite 3 times; screen displays 3.
b.
Press Cook Time, then press "5" , "0" and "0" to set rst stage cook time.
c.
Press Power once, then press "8" to choose 80%
power.
d.
Press Cook Time again, then press "1", "0", "0" and "0" to set second stage
cook time.
to run procedure.
rst stage cooking
EN-23