Tv Connection; Antenna Connection; Speaker System Connection; Optional Equipment Connection - LG HT302SD-A0 Manual

Dvd/cd receiver
Hide thumbs Also See for HT302SD-A0:
Table of Contents

Advertisement

Installation
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.

TV Connection

Make one of the following connections, depending on the
capabilities of your existing equipment.
Tips:
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution:
Make sure the DVD/CD Receiver is connected directly
to the TV. Select the correct AV input on your TV.
Do not connect your DVD/CD Receiver to the TV via
your VCR. The DVD image could be distorted by the
copy protection system.
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the video
cable supplied (V).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding jacks on the TV
using a Y P
P
cable (C).
B
R
4
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
Rear of DVD/CD Receiver

Antenna Connection

Connect the supplied FM/AM antenna for listening to the
radio.
Connect the AM Loop aerial to the AM aerial
connector.
Connect the FM Wire aerial to the FM aerial connector.
Notes:
To prevent noise pickup, keep the AM Loop aerial away from
the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After connecting the FM Wire aerial, keep it as horizontal as
possible.

Speaker System Connection

Connect the speaker wires the speaker terminals.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
Be sure to match the speaker wires to the appropriate
terminal on the components, + to + and – to –. If the
cables are reversed, the sound will be distorted and
will lack bass.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid excessive
output on the speakers.

Optional Equipment Connection

Connect a VCR to the AUX IN connectors.
Rear of TV
VIDEO
COMPONENT VIDEO /
INPUT
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
L
C
V
To AUX IN AUDIO
(L/R)
Rear of VCR
AUDIO (L)
AUDIO (R)
To AUDIO OUT (L/R)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht302sd-a2Ht302sdSh32sd-sSh32sd-w

Table of Contents