Table of Contents
Advertisement
Operation
Operate using the Front Panel
1. STANDBY/ON/STANDBY indicator
Lights red when the receiver is in Standby mode (off)
2. USB Port
Connect the USB port of a USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press STOP (x) twice in
a row.
2. Remove the USB device from the unit.
3. DISC Tray
4. DISPLAY Window
5. Remote Sensor:
Remote Control Operation Range
Point the Remote Control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the Remote
Sensor
Angle: About 30° in each direction in front of the Remote
Sensor
6. OPEN/CLOSE
Opens and closes the disc tray.
7. FUNC./PLAY
Press and hold down this button about 3
seconds, then press repeatedly to select other function.
8. MONO/ST./PAUSE/STEP
If an FM program is noisy
Press MONO/ST. on the front panel to make "ST." disappear in
the display window. There will be no stereo effect, but the
reception will improve. Press the button again to restore the
stereo effect.
Operate using the Remote Control
1
6
7
8
9
1. POWER
2. OPEN/CLOSE
Opens and closes the disc tray.
3. FUNCTION SELECT buttons
4. SLEEP
You can set the DVD/CD Receiver to turn off automatically
at a specified time.
1. Press SLEEP to set the desired sleep time. The SL
indicator and the sleep time appears in the display window.
2. Each time you press SLEEP the setting changes in the
following order.
2
3
4
5
10
BAND, DVD, AUX, USB
9. STOP
10. TUNING(-/+)/SKIP/SCAN(.
For manual tuning, press TUNING (-/+) repeatedly.
For automatic tuning, press and hold TUNING (-/+) for about
two seconds on the front panel.
11. VOLUME controller
Adjusts speaker volume.
Don't extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and Video
files can be played.
This unit cannot use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multimedia Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program installation
when you have connected the unit to a computer are not
supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not be
supported.
If the drive of USB device is two or more, a drive folder is
displayed on the screen. If you want to move to the initial
menu after you select a folder, press RETURN.
Digital cameras and mobile phones are not supported.
SL 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF
Note: You can check the remaining time before the DVD/CD Receiver
turns off.
Press SLEEP. The remaining time appears in the display window.
5. DIMMER
This function will change the brightness of the display
window on the front panel during in power-on status. Press the
DIMMER repeatedly.
6. 0-9 numerical buttons
Selects a service, program number
directly or selects numbered options in a menu.
7. XTS Pro
Each time you press XTS Pro the setting changes in the
following order.
On (XTS) → NORMAL → Pro (XTS-P)...
XTS-P: The unique sound quality of the LG Technology creates the
optimum sound for you to play the perfect playback of the original
sound and to feel the living sound source.
XTS: When playing a movie with weak bass relative to the general
music, it forces sound to the woofer.
In the mode of 2 CH BYPASS, It creates the high display effect by
playing the sound source via the rear speakers same as the front
speakers.
Note: The XTS mode is temporarily disabled when changing from
2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH.
NORMAL: XTS-P and XTS modes turn off.
8. RETURN
Removes the setup menu.
9. SOUND
You can enjoy surround sound simply by selecting one of
the pre-programmed sound fields according to the program you want
to listen to (2 ch. sound only).
Press SOUND button repeatedly.
→
bPASS(BYPASS)
OnStR(ON STAGE)
→
→
CLUb(CLUB)
HALL(HALL)
THEA(THEATER)
→
Chur(CHURCH)
PL ll-1(PL ll MOVIE)
→
→
PL ll-3(PL ll MTRX)
bPASS(BYPASS)...
Note: Initial sound mode is BYPASS.
10. SUBTITLE
DVD
DivX
During playback, press SUBTITLE repeatedly to select a desired
subtitle language.
. bb/BB>
> )
→
→
STU(STUDIO)
→
→
PL ll-2(PL ll MUSIC)
5
Advertisement
Table of Contents
