How To Use - LG RD17GQGD1 Owner's Manual

1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 10

HOW TO USE

10
HOW TO USE
Push start/stop button.
- The louver opens and smart dehumidification starts.
But, if there is no button operation, it operates continuously for 30 minutes before operating at
desired humidity 50%.
- The current humidity is displayed on The humidity & Off timer display.
Press operation mode button to select desired operation mode among
smart dehumidification, jet dehumidification, silent dehumidification,
spot drying, and laundry drying mode.
- The selected operation indicator lamp is lighted.
- The selected operation mode starts after 3 seconds.
Press Humidity Control ∧ / ∨ button to change humidity.
- Desired humidity can be set to 30 ↔ 35 ↔ 40 ↔ 45 ↔ 50 ↔ 55 ↔ 60 ↔ 65 ↔ 70.
Humidity can be set with the units of 5%.
- During the humidity setting, desired humidity is displayed on the humidity display part, and the
current humidity is displayed after about 5 seconds.
- Current humidity is displayed in the units of 5% from 25~90%.
If it is less than 25%, it is displayed as 25%, and if it is 90% or more, it is displayed as 90%.
Press Wind Amount Control button to change wind amount.
You can set the wind amount to low or high wind.